SANTI'S FANTASY PHOENIX
Step-by-Step Instructions


* · Here are Photo Instructions to multi-hoop and create the Fantasy Phoenix design *
Santi's Fantasy Phoenix

PLEASE NOTE: Due to the size of the images this page may take long to open


1. PRINT THE TEMPLATES:
- For Phoenix with florals: 4 designs:
Sfphoenixsew1; Sfphoenixsew2; Sfphoenixsew3; Sfphoenixsew4
- For Phoenix with NO florals: 3 designs: Sfphoenixsew2; Sfphnxleg; Sfphoenixsew4
- Print in your Embroidery software in be true/real size
- Print on printer transparency paper


Image of fpins001.jpg
 Image of fpins002.jpg
 Image of fpins003.jpg
2. Cut out templates and align "sew1" & "sew2" at the crosses provided and sticky tape together.
3. Cut out templates and align "sew3" & "sew4" at the crosses provided and sticky tape together.
4. Mark centre of fabric. Place first template set on
fabric aligning the tail side with centre of the fabric.
Use a ruler to mark the placement lines of designs.

Image of fpins004.jpg
 Image of jjpinstruct005.jpg
 Image of jjpinstruct006.jpg
5. Mark the centre of the designs on the fabric
6. Hoop stabaliser (medium weight) and mark centre lines of hoop
7. Place centre of design on centre of hoop and stick down with sticky spray (505 or other)

Image of fpins005.jpg
 Image of fpins006.jpg
 Image of fpins007.jpg
8. Stitch 1st design
( sew1 )
9. After stitching the first design you can check your alignment with your templates
10. Hoop and stitch the 2nd design

Image of fpins008.jpg
 Image of fpins009.jpg
11. Now align the 2nd set of templates to the embroider on the fabric. Draw your placement lines for "sew3"
12. Hoop and stitch the 3rd design "sew3".
NOTE: This design must be hooped sideways

Image of fpins010.jpg
13. Place template on the embroidery and draw the placement lines for the phoenix body "sew4"

14. Hoop and stitch the 4th design: The body

15. Add Crystals for a special sparkle!

FANTASY PHOENIX COMPLETE!

Image of fpins011.jpg


Image of emailed.gif

DESIGN INDEX