JACOBEAN JEWEL PEACOCK Step-by-Step Instructions

* Here are Photo Instructions to multihoop and create the Jacobean Peacock design * Jacobean Jewel Peacock PLEASE NOTE: Due to the size of the images this page may take long to open

1. PRINT THE TEMPLATES: - For Peacock with florals: 4 designs: peacock01; peacock03; peacock04; peacock05 - For peacock with NO florals: 2 designs: peacock01; peacock02 - Print in your Embroidery software in be true/real size - Print on printer transparency paper

2. Cut out templates and align the florals at the crosses provided and sticky tape together. Use a ruler to ensure the templates are parallel with one another.	3. Cut out templates and align the peacock body and tail at the crosses provided and sticky tape together	4. Mark centre of fabric. Place the floral template on the fabric matching the cross with the centre of the fabric. Use a ruler to mark the placement lines of the design.

5. Mark the centre of the designs on the fabric	6. Hoop stabaliser (medium weight) and mark centre lines of hoop	7. Place centre of design on centre of hoop and stick down with sticky spray (505 or other)

8. Stitch 1st design (peacock04)	9. After stitching the first design you can check your alignment with your templates	10. Hoop and stitch the 2nd design

11. Looking only at your templates place your peacock templates over your floral templates and align so that the bird sits on the branch and that there are no gaps between the body and the branches. The tail slightly overlaps the branch at bottom left.

12. Now align the peacock templates to the florals on the fabric. Draw your placement lines for the peacock tail only.	13. Hoop and stitch the 3rd design Peacock Tail	14. Place template on the embroidery and draw the placement lines for the peacock body.

15. Hoop and stitch the 4th design The body

PEACOCK COMPLETE!

DESIGN INDEX